| PRODUCTS |
We offer 
products: the best in rainwater harvesting worldwide!
Our systems require minimum maintenance and will last a lifetime.
Component #1: Wisy VORTEX FILTERS
Videos:Self-cleaning Wisy filter • WFF 150 • Wisy filter cutaway
| Model | Description | ||
|---|---|---|---|
| GRS | Wisy Garden Filter | ||
 |
Filters 800 – 1,000 sq.ft. Installed in vertical metal or plastic downspouts. Filter provides overflow protection and diversion when the collection tank is full. Housing and filter insert made of stainless-steel. Filter mesh size 0.44 mm (440 microns). Filter insert requires cleaning a few times a year and is dishwasher safe. The Garden Rainwater Collector connects to a single vertical rainwater downspout and can filter precipitation from a roof area up to a 850 – 1,000 square feet for irrigation, car washing or other non-potable uses. The filter is installed above grade in the vertical rainwater down piping to direct debris to the stormwater system and divert clean rainwater to the storage tank or rain barrel. The filter also acts as a first flush device. This filter should only be used with round downspouts or with a converter kit providing at least 20” of vertical round pipe above the filter. Parts include: housing, filter insert. Optional equipment: Wisy Garden Filter Instructions: English & French Info Sheet - Download Click to download and watch an animation of the Downspout Filter |
||
| FS | Wisy Downspout Filter Collector | ||
 |
Filters up to 1,600 sq.ft. of rainwater Connects to a single vertical rainwater downspout and can filter up to a 1,600 square foot roof area of rainwater for irrigation, car washing or other non-potable uses. The downspout filter collector is installed above grade in the vertical rainwater down piping to remove debris to the storm water system and divert 95% of the clean rainwater to the storage tank. The filter operates as a first flush device. Installed in vertical metal or plastic downspouts. Filter can provides overflow protection and diversion when the collection tank is full. Housing and filter insert made of stainless-steel. Filter mesh size 0.28 mm (280 microns). Filter insert requires cleaning a few times a year and is dishwasher safe. Parts include: housing, filter insert. Optional equipment: Wisy Downspout Filter Instructions: English & French Info Sheet - Download Click to download and watch an animation of the Downspout Filter |
||
| STFS | Wisy Standpipe Filter Collector | ||
 |
Filters up to 2,000 sq.ft. The Standpipe Downspout Filter Collector connects to a single vertical rainwater downspout and can filter precipitation from a roof area up to 2,000 square feet for irrigation, car washing or other non-potable uses. The filter can be partially buried. The standpipe downspout filter collector is installed in the vertical rainwater downspout piping to direct debris to the stormwatersystem and divert up to 95% of the clean rainwater to an underground storage tank. The filter also acts as a first flush device. Parts include: upper housing, housing and filter insert. Optional equipment: Wisy standpipe downspout filter Instructions: Info Sheet - Download Click to download and watch an animation of the Downspout Filter Top of Page |
||
Watch an animation of how the Wisy downspout filters work |
|||
| RMS Downspout Filter Adapter | |||
 |
The RMS Downspout Filter Adapter is used to convert the conventional rectangle downspouts used in most American construction to a round downspout. Since the WISY downspout is round, this adapter makes converting your downspout a simple process. The RMS is made of light weight PVC and can be painted to match your home.
|
||
| Clip & Screw | |||
 |
The WISY Clip and Screw is designed to connect the WISY Downspout Filters to the downspouts on your home. The clip and screw is made of stainless steel which will not rust and will last as long as your home or business. The WISY Clip and Screw will ensure that the downspout filter is mounted plumb and level which is essential for maximum efficiency of the WISY Downspout Rainwater Harvesting Filter.
|
||
| Hose and Tension Ring | |||
 |
The WISY Downspout Filter is designed to separate particulate from the rainwater and sends the harvested (clean) rainwater to the rainwater storage tank. To ensure maximum efficiency, the hose and tension ring makes the connection from the downspout filter to the storage tank simple. Since the Downspout Filter is visible, the hose and tension ring results in an esthetically pleasing look for your completed rainwater harvesting project.
|
||
| WFF 100 | Wisy Vortex Fine Filter | |
 |
Filters up to 2,000 sq.ft. The Low Capacity Vortex Rainwater Fine Filter is used in installations where multiple downspouts are connected together to a single pipe into the vortex filter. A single unit can filter precipitation from a roof area up to a 2,150 square feet for site irrigation, toilet and urinal flushing, janitorial use, laundries, fire protection, evaporative cooling tower make-up, process water or other non-potable uses. The filter is typically installed in the underground piping system to direct debris to the stormwater system and divert up to 95% of clean rainwater to an underground storage tank. (An above grade application is possible.) Parts include: filter housing, filter insert. Optional equipment: Wisy Low Capacity Vortex Fine Filter Instructions: English & French Info Sheet - Download Videos Watch an animation of the Wisy 100, 150 and 300 filters.Top of Page |
|
| WFF 150 | Wisy Vortex Fine Filter | |
 |
Filters up to 5,500 sq.ft. The Medium Capacity Vortex Rainwater Fine Filter is used in installations where multiple downspouts are connected together to a single pipe into the vortex filter. A single unit can filter precipitation from a roof area up to a 5,500 square feet for site irrigation, toilet and urinal flushing, janitorial use, laundries, fire protection, evaporative cooling tower make-up, process water or other non-potable uses. The filter is typically installed in the underground piping system to direct debris to the stormwatersystem and divert up to 95% of clean rainwater to an underground storage tank. (An above grade application is possible.) Parts include: filter housing, filter insert. Optional equipment: Wisy Low Capacity Vortex Rainwater Fine Filter Instructions: English& French Info Sheet - Download Videos Watch an animation of the Wisy 100, 150 and 300 filters.Top of Page |
|
| WFF 300 | Wisy Vortex Fine Filter | |
 |
Filters up to 33, 000 sq.ft. The High Capacity Vortex Rainwater Fine Filter is used in installations where multiple downspouts are connected together to a single pipe into the vortex filter. A single unit can filter precipitation from a roof area up to a 32,292 square feet for site irrigation, toilet and urinal flushing, janitorial use, laundries, fire protection, evaporative cooling tower make-up, process water or other non-potable uses. The filter is installed in the underground piping system to direct debris to the stormwatersystem and divert up to 95% of the clean rainwater to an underground storage tank. (An above grade application is possible.) Parts include: filter housing, filter insert, child safety device, baseplate, and lid option: aluminum, 12 ton or 60 ton. Optional equipment: Wisy High Capacity Vortex Fine Filter Instructions: English Info Sheet - Download Videos Watch an animation of the Wisy 100, 150 and 300 filters.Top of Page |
|
Watch an animation of the Wisy 100, 150 and 300 filters.
|
||
| Intermediate Ring And Extension Tube | ||
 |
The WISY WFF300 Vortex Filter has a custom made extension tube designed to bring the lid to grade. To install this extension tube, an additional stainless steel ring, Intermediate Ring, is necessary to attach the filter housing to the extension tube. This ring will also allow for the lid to be secured to the top of the extension as required by the manufacturer. Note: The maximum burial depth of the WFF300 is 48 inches. Any deeper installations require the filter to be placed in a vault based on the manufacturer’s installation instructions. To find out more information about burying the WISY WFF Vortex Filter, contact RMS at (540) 375-6750 or email at info@rainwatermanagement.com
|
|
| Vortex Filter Mounting Bracket | ||
 |
The WISY Vortex Filters are designed to be installed below ground or above ground. If the WISY WFF100 or WFF 150 Vortex filter is mounted above ground, the WISY Stainless Steel Mounting Bracket is necessary to install these Vortex. The wall bracket is made of stainless steel and will not rust or tarnish. The WISY Vortex Filter installed using the WISY Wall Bracket will ensure maximum efficiency and sustainability of the RMS Filtration System.
|
|
| WISY Vortex Filter Extension | ||
|
The WISY Vortex Filter is designed to be installed below ground or above ground. If the WISY Vortex Filter is installed below ground, the WISY extension tube is necessary to bring the filter lid to grade. The extension tube for the WISY WFF 100 and WFF 150 are 24” in length. The Maximum extension for the WFF100 and WFF150 filter is 3 extensions or six feet. Any deeper installations require the filter to be placed in a vault based on the manufacturer’s installation instructions. The WISY WFF300 Vortex Filter also has an extension tube to bring the lid to grade. An additional stainless steel ring, Intermediate Ring, is necessary to attach the filter housing to the extension tube. The maximum burial depth of the WFF300 is 48 inches. Any deeper installations require the filter to be placed in a vault based on the manufacturer’s installation instructions.
|
|
| WISY Sieve Basket | ||
 |
The WISY Sieve Basket will allow you to collect 100% of the rainwater passing through the WFF 100 and WFF 150 Vortex Filter. The dirty water and first flush water that normally is rinsed through the filter can be filtered, stored and used for irrigation by simply inserting a sieve basket in the filter. The sieve basket does require periodic cleaning and is not recommended for all applications. To see if a Sieve basket is necessary or will work in your rainwater harvesting application, contact out technical staff at (540) 375-6750 or email at info@rainwatermanagement.com
|
|
| WISY Blind Insert | ||
 |
The WISY Blind insert is available for the WFF 100 and WFF 150 Model filters to restrict water from flowing to your storage tank. The WISY Blind Insert is made from stainless steel and will last the life of the filter. The WISY Blind Insert is essential for above ground applications where no water is to be collected during the winter months. To learn more about this and other WISY Filter Accessories contact our professional staff at (540) 375-6750 or email at info@rainwatermanagement.com.
|
|
| Lifting Handle | ||
 |
When the WISY Vortex Filter is used in a below ground application, the Stainless Steel Filter should be inspected and or removed at least annually. The lifting handle may be necessary to reach the filter if extensions are used. Lifting handles come in various lengths to make inspection and removal of the filter simple. Contact RMS to determine the lifting handle that meets your rainwater harvesting system needs.
|
|
| Flex Couplings | ||
 |
The dimensional flexibility of Fernco couplings ensures leak-proof seals on virtually any pipe material: plastic, cast iron, asbestos cement, clay, concrete, steel, copper and ductile iron. All couplings are clearly marked with part number, size, and pipe materials that the coupling will connect. With the various applications for rainwater harvesting, RMS uses these flexible Frenco couplings to make difficult pipe connections. For special applications, contact our technical staff at (540) 375-6750 or email at info@rainwatermanagement.com.
|
|
Component #2: Wisy SMOOTHING INLET
| Model | Description | |
|---|---|---|
| EB 0300 | Wisy 4 inch Smoothing Inlet | |
 |
Made of stainless steel. Smooths entering water out and up to prevent tank stirring, which disrupts the beneficial biofilm in the tank. The smoothing inlet is an all stainless steel device that fits on the 4″ inlet pipe in the storage tank. It is used to prevent the agitation of sediment at the rainwater inlet into the storage tank. The smoothing inlet also helps aerate the water as it enters the tank. Wisy Smoothing Inlet Instructions: English Info Sheet - Download Top of Page |
|
| Wisy 8 inch Smoothing Inlet | ||
 |
Made of stainless steel. Smooths entering water out and up to prevent tank stirring, which disrupts the beneficial biofilm in the tank. The RMS Smoothing Inlet is an all stainless steel device that fits on the 8″ inlet pipe in the storage tank. It is used to prevent the agitation of sediment at the rainwater inlet into the storage tank. The smoothing inlet also helps aerate the water as it enters the tank. Wisy Smoothing Inlet Instructions: English Info Sheet - Download
|
|
Component #3: Wisy FLOATING FILTERS
| Model | Description | |
|---|---|---|
| SAGF | Wisy Floating Coarse Suction Filter | |
 |
Filters out fine particulate matter when pumping rainwater from tanks. The floating ball is made of polyethylene and the filter is made of stainless-steel. Filter mesh size 1.2 mm (1,200 microns). The floating filter is used to extract and filter rainwater out of the tank, cistern, pond or well. Available alone or as a kit for both submersible and suction pumps. Wisy Floating Coarse Filter Instructions: English Info Sheet - Download
Top of Page |
|
| SAFF | Wisy Floating Fine Suction Filter | |
 |
Filters out fine particulate matter when pumping rainwater from tanks. The floating ball is made polyethylene and the filter is made of stainless-steel. Filter mesh is 0.3mm (300 microns). Available in 1 1/4″ and 2″ nozzle connections. The floating filter is used to extract and filter rainwater out of the tank, cistern, pond or well. Available alone or as a kit for both submersible and jet pumps. Wisy Floating Fine Suction Filter Instructions: English Info Sheet - Download
|
|
Component #4: OVERFLOW DEVICE
The fourth step in the RMS Rainwater Harvesting System is to ensure that your rainwater storage tank overflows. There are a variety of overflow devices that are available to maximize the water quality in your rainwater harvesting system.
The RMS Multisiphon Overflow Device is designed to accept a typical 4” overflow. The RMS Multisiphon provides a skimming effect for the rainwater tank to remove any particulate that enters the rainwater storage tank that is lighter than water. The RMS Multisiphon Overflow Device is also designed to keep odors from entering the tank. The RMS Overflow Device also has a feature that keeps small animals from entering the tank through the overflow pipe. The RMS Multisiphon Overflow Device is designed to be installed on RMS Rainwater Harvesting Systems that are connected to storm drains.
A simple pee trap can be used as an overflow device if the rainwater harvesting storage tank overflows to grade. This pee trap should be sized the same as the inlet to the rainwater storage tank.
A overflow flap can be used on the overflow pipe to keep small animals and reptiles out of your rainwater storage tank. This overflow flap is normally placed outside of your rainwater storage tank and can be easily accessed should it need to be cleaned out. Please contact our professional staff to determine the best overflow option to meet your rainwater harvesting needs at (540) 375-6750 or email info@rainwatermanagement.com.
| Model | Description | |
|---|---|---|
| US 1002 | Multisiphon | |
 |
Connects to the overflow pipe. Effectively removes surface debris through its skimming effect. Prevents the entry of drain smells into the cistern. Protects cistern with backflow prevention and vermin protection. The overflow device is connected to the overflow pipe within the storage container or cistern. The multi-functional overflow device is made of impact-resistant ABS plastic that eliminates drain odors in the tank, provides vermin and backflow protection and skims surface debris. Comes with support strut, clamp and fits 4 inch overflow piping. Wisy Multisiphon Instructions: English Info and SpecSheet - Download Top of Page |
|
Component #5: PUMPS
| Model | Description | |
|---|---|---|
| 16SE0511 Plus | Goulds 1/2 HP Cistern Pump | |
 |
Goulds 1/2 HP Submersible Cistern Pump, 115 volt. Includes cistern pump with 1 1/4″ nozzle and base plate, Wisy coarse floating filter and 7′ of suction hose.
FeaturesInfo and Spec Sheet - Download
|
|
| 1SC51D1BA Plus | Goulds 3/4 HP Cistern Pump | |
 |
Goulds 3/4 HP Submersible Cistern Pump, 230 volts, with custom-made baseplate and adaptor for Wisy 1 1/4″ coarse floating filter and 7′ of suction hose Info and Spec Sheet - Download Top of Page |
|
| 1SC51E1CA Plus | Goulds 1 HP Cistern Pump | |
 |
Goulds 1 HP Submersible Cistern Pump, 230 volts, with custom-made baseplate and adaptor for Wisy coarse 2″ floating filter and 7′ of suction hose Info and Spec Sheet - Download Top of Page |
|
| DS-MQ 3-45-220v | Grundfos 1 HP Jet Pump | |
 |
Grundfos 1 HP Jet Pump, 115 or 220 volts. The pump sits outside the tank in a protected area and works with the Wisy floating filter and hose. The pump also includes a built-in pressure tank. Info and Spec Sheet - Download Top of Page |
|
| RainPerfect Solar Powered Rain Barrel Pump System | ||
 |
The RainPerfect Solar Powered Rain Barrel Pump System is a very simple and cost effective system. The solar panel charges the NiMH battery so no electricity is needed. The RainPerfect powered by the sun can pump out 100 gallons at 13 PSI on one charge. The RainPerfect system is perfect for any small job around the house such as watering plants or washing vehicles. For more information on the RainPerfect Solar Pump, contact Rainwater Management Solutions (866) 653-8337 or via email at info@rainwatermanagement.com Info and Spec Sheet - Download |
|
| Check Valves/Back Flow Preventers | ||
 |
A check valve, clack valve, non-return valve or one-way valve is a mechanical device, a valve, which normally allows fluid (liquid or gas) to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Check valves are often part of common household items. Although they are available in a wide range of sizes and costs, check valves generally are very small, simple, and/or inexpensive. Check valves work automatically and most are not controlled by a person or any external control; accordingly, most do not have any valve handle or stem. The bodies (external shells) of most check valves are made of plastic or metal. Double Check Valve Assemblies are installed at cross-connections to prevent the backflow of rain water into the potable water supply. The assembly consists of two positive seating check modules with captured springs and rubber seat discs. The check module seats and seat discs are replaceable. Service of all internal components can be accomplished through a single access cover secured with stainless steel bolts. The Double Check Valve Assembly is constructed using Lead Free materials. Always check with local authority having jurisdiction regarding vertical orientation, frequency of testing or other installation requirements. |
|
| Pump Cooling Jacket | ||
 |
For many years submersible pumps were difficult to use in rainwater harvesting applications. RMS spent many years designing, perfecting, and engineering a custom made approved cooling jacket designed specifically to adapt a typical well pump for a rainwater harvesting application. RMS can place any size well pump in the approved RMS Cooling Jacket to meet your rainwater harvesting system needs. The RMS Cooling Jacket is the only one of its kind that adapts a well pump to accept the WISY Floating Filter and provide the highest quality of water available in a rainwater harvesting system. To obtain additional information on the RMS Cooling Jacket contact RMS at (540) 375-6750 or email info@rainwatermanagement.com. Info Sheet: Download
|
|
| Custom Pumps and Pump Skids | ||
 |
RMS has the expertise and technical support available to help determine the pump size and type to meet your rainwater harvesting needs. RMS has a large selection of submersible rainwater harvesting pumps. All RMS submersible pumps are adapted to accept the WISY floating filters. RMS is the only company that has an approved engineered cooling jacket to be used with well pumps to provide high flow of water from your rainwater storage tank. The RMS cooling jacket, base plate and nozzles are approved by pump manufacturers and carry the manufacturer’s warranty. RMS offers a large selection of simplex and duplex Suction/Booster pumps to meet your rainwater harvesting needs. RMS Booster Pumps are designed to connect to the WISY floating filter providing the highest quality water available in a RMS rainwater harvesting system. All Booster pumps are designed to meet or exceed your minimum pumping requirements. RMS will determine the appropriate Variable Frequency Drive to control the pump to ensure the life expectancy of the pump. RMS recently introduced pump stations that are skid mounted unitized pump station, with an enclosure built by a single manufacturer. All equipment including but not limited to pumps, motors, piping, filters, valves, instrumentation and controls shall be mounted on a common structural steel base to form a complete operating pumping station. The base of the enclosure shall be mounted on a concrete pad supplied by others, of sufficient size and strength to support pump system. All RMS pump station bases shall be designed and fabricated to provide proper structural support for all attached equipment. The base shall supply sufficient rigidity to withstand the stresses of reasonable and competent transportation to site, off loading, installation, and operation. RMS Pump station base are manufactured of #12 carbon steel. For more information on sizing your submersible, suction pump skid and controller for your pumping requirements, contact RMS at (540) 375-6750 or email at info@rainwatermanagement.com.
|
|
| Pressure Tank and Tee Kit | ||
 |
RMS Rainwater Harvesting Systems are not just components, the systems are complete systems. All RMS Rainwater Harvesting Systems offer a pressure tank sized to prolong the life expectancy of the pump in your rainwater harvesting system. Since most RMS Rainwater Harvesting Systems are sized using a Variable Frequency Drive, cumbersome pressure tanks are minimized to meet the demand requirements of the Variable Frequency Drive. For more information on Variable Frequency Drives, see our section on RMS Pump Controllers. The RMS Tank Tee Package comes equipped with a direct connection for the conventional pressure tank system. The RMS Tank Tee Package also has a pressure switch, pressure relief valve; gauge and boiler drain to complete the system. The pressure switch is designed to start and stop rainwater pumps based on minimum and maximum pressure settings on the pressure switch. Info Sheet: Download
|
|
Component #5: BACKUP WATER COMPONENTS
| Model | Description | |
|---|---|---|
| Normally Open Pump Float Switch | ||
 |
Every step in the RMS Rainwater Harvesting System is thoroughly thought out to make your rainwater harvesting system a high quality system with minimal maintenance. Rainwater pumps are not designed to pump when there is no water in a storage tank and will actually burn up if there is not some type of protection for the pump. The RMS Normally Open Float Switch is provided with all RMS Rainwater Harvesting Systems and installed in the rainwater storage. The switch is wired directly through the pump to provide maximum protection for your rainwater harvesting pump. The float switch is preset on installation to disconnect power from your pump before the rainwater tank completely empties. After the next rain event, the float activates and the pump automatically starts when there is a demand. To find out more about the RMS Normally Open Float and its application to protect your rainwater harvesting pumping system, contact RMS at (540) 375-6750 or email at info@rainwatermanagement.com. Info Sheet - Download |
|
| RPZ Backflow | ||
RPZ (Reverse Pressure Zone) water backflow valves/preventers are used to protect water supplies from being contaminated by water flowing back into the fresh water supply. For example, an irrigation system has the potential to allow contaminated water from the lawn to flow back into the pipes that deliver drinking water. RMS uses RPZ backflow valves/preventers to connect domestic back up water and rainwater. When installing a rainwater harvesting system it is necessary for you to check with your locality to determine what type of backflow valves/preventers are required.
|
||
| RMS AIR GAP | ||
 |
When using domestic water as a back up to rainwater, localities require a mechanism to ensure the rainwater does not flow into domestic water system. Normally this can be accomplished by using a double backflow preventer however; some localities require an actual air separation between the two water sources. The RMS Stainless Steel Air Gap is installed on the domestic back up to create this separation. The RMS Air Gap comes in different sizes to meet your domestic line size. The RMS Air Gap is made 100% from stainless steel. For more information on cross connections and back up water systems contact our staff at (540) 375-6750 or email at info@rainwatermanagement.com.
|
|
| RMS Normally Closed Solenoid Valve | ||
 |
The RMS Normally Closed Solenoid Valve is an electromechanical device which allows for an electrical device to control the flow of liquid. The electrical device is activated by a Normally Closed float Switch in the rainwater harvesting tank and causes a current to flow through a coil located on the solenoid valve. This current flow in turn results in a magnetic field which causes the displacement of a metal actuator. The actuator is mechanically linked to a mechanical valve inside the solenoid valve. The RMS Normally closed Solenoid Valve then changes state, or closes to allow a liquid flow through the solenoid valve. A spring is used to return the actuator and valve back to their resting state when the current flow is removed. The RMS Normally Closed Solenoid Valve comes in various sizes to meet your rainwater harvesting needs. For more information please contact RMS at (540) 375-6750 or email at info@rainwatermanagement.com.
|
|
| Pressure Reducing Valve | ||
 |
RMS uses Pressure Reducing Valves in the RMS Rainwater Harvesting System to make the change between rainwater and domestic water automatic without the use of floats or a power source. To find out more about using a Pressure Reducing Valve in your rainwater harvesting system, contact RMS at (540) 375-6750 or email our technical support staff at info@rainwatermanagement.com.
|
|
Component #6: BACKUP WATER SOURCE SWITCH
| Model | Description | |
|---|---|---|
| RMS Normally Closed Float Switch | ||
 |
To control normally closed solenoid valve for second source water feed. Float switch to be fixed on the inlet pipe or submersible pump. Float switch comes with switch level and float housing of polyethylene with flexible cable. (Switch level is defined as the exact switch point where the water level rises to desired level). Info Sheet - Download |
|
Component #8: TANK LEVEL INDICATOR
| Model | Description | |
|---|---|---|
| D110 | Wireless Level Sensor | |
 |
Wireless sensor that gives remote tank level readings by pressing a button on a desktop unit. Sensor has an operating range of 984 to 1600 feet. The maximum detection depth is 10 feet. Sensor and bench unit operate on four “AA” batteries. Sensor can be mounted within minutes. Can be installed on a slope with its adjustable transponder. Suitable for tanks/cisterns made from plastic, tin, wood, concrete and any other materials. Product Manual - Download | |
OPTIONAL
| Model | Description | |
|---|---|---|
| PURKIT | Purification Skid | |
 |
The RMS purification skid/kit treats rainwater to drinking water standards and is suitable for all indoor water needs. The UV light system does not inject any chemicals into the water. The purification kit includes all the necessary filters, housing and housing wrenches. The kit requires the user to make all the connections necessary. The purification skid comes pre-assembled on a polyethylene mount. The skid can be equipped with an optional jet pump, pressure tank and/or water meter. The Kit consists of two filter housings and a UV light that are installed in-line from the rainwater tank to the indoor water line. Pressure gauges (not provided) and valves (not provided) should be installed prior to the 1 micron filter housing and after the carbon filter. Pressure gauges monitor flow to determine when filters require replacing. Valves allow for isolating filters for maintenance. Plug UV light into a grounded outlet. Local code will determine the type pipe and connections used in your application. For additional information on this and other RMS rainwater harvesting products, contact us at (540) 375-6750 or email at info@rainwatermanagement.com. Purification Instructions: English
|
|
| STRING WOUND SEDIMENT FILTERS | ||
 |
RMS String Wound Sediment Water Filters are used to eliminate fine particulate from rainwater. Since sediment is measured in microns, the RMS String Wound Water Filters are available in various micron sizes ranging from 1 micron to hundreds of microns. RMS Replacement micron filters are also available from RMS. For more information on the RMS String Wound Sediment Water Filter contact the RMS staff at (540) 375-6750 or email at rhall@rainwatermanagement.com Info Sheet: Download
|
|
| UV Light | ||
 |
RMS UV Purification Systems use ultraviolet germicidal light to purify and disinfect rainwater through a unique and rapid method, without the use of heat or chemicals. The germicidal ultraviolet lamps utilized produce short wave radiation lethal to bacteria, virus and other microorganisms. Throughout the years ultraviolet technology has become well established as a method of choice for its effectiveness, economy, safety, speed, ease of use, and because the process is free of by-products. The RMS UV Purification Systems come in many sizes to meet your rainwater harvesting system. To determine the UV Purification System that is right for your application, contact RMS at (540) 375-6750 or email at info@rainwatermanagement.com
|
|
| UV Replacement Lights | ||
 |
UV Replacement lights for the RMS UV Purification System are available through RMS and can be shipped directly to you. The size of your UV Purification System determines the size and number of replacement lights necessary to operate your UV Purification System. The RMS UV Purification System is designed to kill bacteria and other microorganisms for approximately 9,000 continuous hours. To ensure continuous water treatment, RMS recommends that you replace the UV lamp annually with the appropriate RMS UV replacement lamps. For more information on UV Purification and replacement lights contact RMS at (540) 375-6750 or email at info@rainwatermanagement.com
|
|
| RMS MODULAR SYSTEM | ||
 |
The RMS 1050 Modular Rainwater Harvesting System has been developed by Rainwater Management Solutions to provide a simple solution to harvesting rainwater. The RMS 1050 kit includes everything you need to connect the system to the downspouts of your building. Since the kit comes with all the connection material pre drilled and pre cut, the system typically takes less than two hours to assemble. Once the RMS 1050 is buried, just connect the rainwater supply line to the pressure tank and switch supplied with the system and you are ready to collect rainwater and pump rainwater. Additional tanks can be connected to increase the storage capacity of your system. For more information on the RMS 1050 System contact RMS at (540) 375-6750 or email at info@rainwatermanagement.com.
|
|
RMS Rainwater Harvesting Control Panels
|
||
| RMS Series 100 Controller | ||
 |
Rainwater Management Solutions has developed a Rainwater Harvesting Controller designed specifically to integrate your rainwater system components. The RMS Series 100 Controller has audible and visual alarms with a LED display. The controller is pre-programmed and can be field adjusted to control the cistern pumps, open and close the solenoid valves, monitor flows, control injection pumps and monitor UV Purification Systems. If you assign the RMS Series 100 Controller an IP Address, the RMS Series 100 Controller can communicate through email and provide reports on rainwater and domestic water usage as well as water quality. The RMS Series 100 Controller can connect to system networks through USB or Ethernet. This controller is designed to control your entire rainwater harvesting system regardless of the complexity of your system. The RMS Series Controller is the most affordable solution to integrating your rainwater harvesting system in the market today. For more information on the RMS Series 100 Controller contact RMS at (540) 375-6750 or email at info@rainwatermanagement.com. Info Sheet - Download |
|